Skip to content

Builders Risk Insurance in Texas: Hail, Wind, and the Deductible Math

A builders risk policy in Texas usually looks fine on paper until the first hail storm. Then the builder finds out the wind and hail deductible is not a flat dollar amount. It is a percentage of the value of the whole project, and the check they have to write is a lot bigger than they planned.

That is the Texas version of builders risk. Fire and theft matter here like anywhere else, but wind and hail drive the claims, the deductibles, and a lot of the pricing. On the Gulf Coast, a named storm adds another layer on top of that.

This guide is for Texas general contractors, custom home builders, developers, and owners doing a build or major renovation. For the national basics first, start with our guide to what builders risk insurance is and when it is required.

Is Builders Risk Required in Texas?

Texas law generally does not require builders risk on its own. The requirement comes from the people around the project.

  • The lender. If there is a construction loan, the bank will almost always require builders risk naming it as mortgagee or loss payee before it funds. No policy, no draw.
  • The contract. Most construction contracts spell out who carries builders risk, for how much, and on what form.

Even with cash and no contract requirement, think hard before skipping it. Until the building is done, nothing else covers it. General liability does not pay to rebuild your own project.

Who Should Buy It: the Contract Decides

This is where a lot of Texas jobs go sideways. The owner assumes the builder has it. The builder assumes the owner has it. Nobody checks until there is a loss.

The standard AIA owner-contractor forms, the A201-2017 general conditions and the insurance exhibit that goes with the AIA agreements, put builders risk on the owner unless the contract shifts it to the contractor. The owner's policy is supposed to cover the full value of the project on a replacement cost basis. Plenty of Texas contracts change that, especially residential and design-build work, where the builder usually carries it and folds the cost into the price.

What to do:

  • Read the insurance section of the contract before you price the job. If builders risk is yours, it goes in the bid.
  • Make sure the named insureds match the contract. Owner, general contractor, subcontractors, and the lender may all need to be on it.
  • Check the waiver of subrogation language. Most contracts expect the parties to waive claims against each other for losses the builders risk policy pays.
  • Get a certificate of insurance before work starts. It settles who holds the policy.

This is not legal advice. If the contract language is unclear or heavily modified, have a Texas construction attorney read it before you sign.

What Builders Risk Covers

Builders risk is property insurance for a building while it is being built. The core of most policies looks like this:

  • The structure itself, from foundation to roof, as it goes up.
  • Materials and supplies on site that will become part of the building, like lumber, trusses, windows, and HVAC units waiting to be set.
  • Materials in transit to the site, usually up to a sublimit.
  • Materials stored off site, such as a staging yard or a supplier's warehouse, usually up to a sublimit.
  • Temporary works like scaffolding, forms, and temporary fencing or structures, on many forms.
  • Debris removal after a covered loss, often with its own limit.

What it usually does not cover is your tools and equipment. Your skid steer, your generator, and your crew's tools need inland marine and equipment coverage. Injuries and damage to other people's property belong on your Texas general liability policy.

Wind and Hail: the Texas Deductible Math

Here is the part that catches people. On many Texas builders risk policies, the wind and hail deductible is not a flat dollar amount like the deductible for fire or theft. It is a percentage of the insured value of the project. That percentage varies by carrier and location. It is often a percentage, sometimes several percent, and it can be higher where the wind exposure is worse.

A percentage sounds small until you run it against the whole project. Some quick arithmetic with hypothetical numbers:

  • A 1% deductible on a $500,000 build is $5,000.
  • A 2% deductible on a $1 million build is $20,000.
  • A 5% deductible on a $3 million build is $150,000.

Those figures are math, not quotes. The point is that the deductible usually applies to the insured value of the project, not to the size of the damage. A hail storm that does $30,000 of damage to a $1 million build with a 2% wind and hail deductible leaves you paying the first $20,000. If the damage is under the deductible, the policy pays nothing.

Named storm deductibles on the Gulf Coast

Projects near the coast often carry a separate named storm deductible on top of everything else. It kicks in when the damage comes from a storm that has been named by the National Hurricane Center, and it is usually also a percentage. Read how the policy defines a named storm and how long the named storm period lasts. Those definitions decide which deductible applies when a tropical storm brings hail and wind inland.

What to do about it

  • Ask for the wind, hail, and named storm deductibles in dollars, calculated on your actual limit, before you bind.
  • Decide who pays the deductible. Put it in the contract so the owner and the builder are not arguing over it after a storm.
  • Ask what a lower percentage would do to the price. Sometimes it is worth it.
  • Budget the deductible as a real project cost. If your margin cannot absorb it, that is a conversation to have now.

Hail season and hurricane season

Timing matters. The National Weather Service notes that severe weather in the Dallas-Fort Worth area peaks in spring, and that large hail hits the Metroplex nearly every year. On the coast, Atlantic hurricane season runs from June 1 through November 30. An open roof in April in North Texas, or an unsheathed frame in September near Corpus Christi, is a different risk than the same work in a quiet month. Have the policy in force before materials show up.

What a percentage wind and hail deductible means on a $1 million build

Your share of a wind or hail loss before the policy pays, $1,000,000 insured value
DeductibleYou pay first
1%$10,000
2%$20,000
3%$30,000
5%$50,000

Arithmetic on a hypothetical limit, not a quote. Your policy sets the percentage and what it applies to.

TWIA and Coastal Projects

The Texas Windstorm Insurance Association (TWIA) provides wind and hail coverage in its designated coastal area: the 14 first tier coastal counties (Aransas, Brazoria, Calhoun, Cameron, Chambers, Galveston, Jefferson, Kenedy, Kleberg, Matagorda, Nueces, Refugio, San Patricio, and Willacy) plus parts of Harris County east of Highway 146, including La Porte, Morgan's Point, Pasadena, Seabrook, and Shore Acres.

When private carriers exclude wind and hail on a coastal job, TWIA can write that piece. It offers builders risk by endorsement for structures under construction, with its own eligibility rules.

The windstorm inspection has to happen during construction

To be eligible for TWIA coverage, a structure built or substantially altered in that area generally needs a Certificate of Compliance (Form WPI-8) from the Texas Department of Insurance showing it meets the windstorm building code. The steps that matter for a builder:

  • File the application for windstorm inspection (Form WPI-1) with TDI before construction starts.
  • Have the required inspections done during construction, by a TDI inspector or an appointed Texas licensed engineer. Windows, doors, roof covering, framing, and connections get looked at while they can still be seen.
  • TDI issues the WPI-8 once all inspections are approved and the paperwork is in.

Skip that and you can end up with a finished building that TWIA treats as ineligible, which is a problem for you, the buyer, and the lender. In some flood zones TWIA also requires a separate flood policy on new construction. Requirements change, so confirm current rules with TWIA and the TDI windstorm inspection program before you break ground.

Common Exclusions and Gaps

These are the gaps we see most often on Texas builds:

  • Flood. Usually excluded or tightly sublimited. If the site is near water, ask about flood specifically.
  • Earth movement. Settling, shifting soil, and similar ground movement are commonly excluded. That matters on expansive clay.
  • Faulty workmanship and design. The cost to fix bad work is usually excluded, though some forms cover the resulting damage.
  • Mechanical and electrical breakdown during testing and startup, unless it is added.
  • Theft limits and conditions. Theft of materials not yet installed may carry a sublimit, or require a locked or fenced site.
  • Vacancy and stoppage. If work stops for a set period, some policies restrict coverage. Tell your broker if the job stalls.
  • The existing structure on a renovation. Builders risk on a remodel or addition often covers only the new work. The existing building may need to stay on its own property policy, and that carrier needs to know about the construction.

Soft Costs and Delay in Completion

A storm that wrecks a half-built project costs more than the lumber. The job runs late, the construction loan keeps charging interest, and the lease-up or sale date slips.

Those are soft costs, and the basic builders risk policy does not pay most of them. Soft cost and delay in completion coverage can be added. It is worth a hard look for developers and anyone carrying a construction loan, where the delay often costs more than the physical damage.

Ready to see what your insurance should cost?

General liability, workers comp, commercial auto, equipment - we package the whole program for contractors. Apply in about 10 minutes and we will get to work.

How Builders Risk Is Priced in Texas

The price is built from the project, and two Texas jobs with the same budget can price very differently. The factors that move it:

  • Completed value. The policy limit is usually the full completed value of the project, not what is in place today.
  • Construction type. Wood frame is generally a bigger fire and wind exposure than masonry, concrete, or steel.
  • Location. Distance to the coast, the wind and hail history of the area, and fire protection all count.
  • Duration. A longer build is more time at risk. Extensions cost money, so set a realistic term up front.
  • Deductibles. A higher wind and hail percentage usually lowers the price and raises your exposure.
  • Site security. Fencing, lighting, cameras, and how materials are stored all affect the theft side.

For smaller jobs, our piece on when builders risk is worth it on small projects walks through the tradeoffs.

When the Policy Ends and the Handoff

The life of a Texas builders risk policy

Start to finish
Before
Contract decides who buys it. Bind before materials hit the site.
Coast
In TWIA counties, file WPI-1 and get inspections during construction.
During
Covers the structure, materials on site, in transit and in storage.
End
Coverage stops at the policy end, occupancy or completion, per the wording.
Handoff
Permanent property policy starts the day builders risk ends. No gap.

Exact end triggers depend on your policy form. Read them before the owner moves in.

Builders risk is temporary. Depending on the wording, it typically ends at the earliest of the expiration date, the building being occupied or put to its intended use, or completion and acceptance. Move the owner in early, or let a tenant start fitting out, and coverage can end sooner than you think.

The permanent property or homeowners policy has to be bound before builders risk ends, with no gap. On the coast, that permanent policy needs the WPI-8 for wind coverage through TWIA, which is one more reason to keep the inspections on track during the build.

Bonds Usually Come With the Job

On public work and a lot of private commercial work, the same contract that requires builders risk also requires performance and payment bonds. If you are moving into bigger Texas projects, it helps to set up the insurance and the bonding program together. Our Texas business insurance and Texas trade contractor insurance pages cover the rest of the program.

How the Grit Team Handles Texas Builders Risk

We start with the contract and the lender's requirements, because they decide who buys the policy and what it must include. Then we look at the site: wind, the coastal rules, flood, and construction type. We show you the deductibles in dollars on your actual limit, and we line up the handoff to the permanent policy before the job wraps up.

We cannot promise a carrier will accept every project or that a policy covers a loss before the facts are in. What we can do is show you where the gaps are before a storm finds them. You can read more about the coverage on our builders risk insurance page.

Frequently Asked Questions

Is builders risk insurance required in Texas?

Builders risk is generally not a coverage Texas law requires on its own. The requirement comes from the paperwork around the job. Construction lenders almost always require it before they fund a draw, and most construction contracts say who must carry it. If you are building with cash and no contract requirement, it is your call, but you are carrying the whole risk of a fire, hail storm, or theft on a structure that is not covered by anything else yet.

How much does builders risk insurance cost in Texas?

There is no single number, because the price is built from the project. Carriers look at the completed value of the build, the construction type (frame costs more to insure than masonry or steel), where the site is and how exposed it is to wind and hail, how long the job will run, the deductible you choose, and site security. A frame custom home on the coast and a tilt-wall building in Lubbock are priced on very different terms. A broker can get real quotes once the budget, plans, and schedule are in hand.

What is a builders risk deductible?

It is the part of a covered loss you pay before the policy pays. On many Texas builders risk policies there are two or more deductibles: a flat dollar amount for most losses, and a separate wind and hail deductible that is often a percentage of the insured value. Coastal projects can also carry a separate named storm deductible. Read each one and do the math on your own limit before you sign.

Does builders risk cover hail damage in Texas?

Hail is usually a covered cause of loss on a builders risk policy, but it is often subject to its own wind and hail deductible, and some coastal policies exclude wind and hail entirely so it can be written separately. Check the declarations page for a wind or hail exclusion and for the deductible that applies to it.

Who pays for builders risk, the owner or the contractor?

Whoever the contract says. The standard AIA owner-contractor forms put builders risk on the owner unless the contract moves it to the contractor. Many residential and design-build contracts do move it to the builder. Read the insurance section before you price the job, so it is either in your budget or clearly in the owner's.

Does builders risk cover flood in Texas?

Usually not by default. Flood is a common exclusion on builders risk, and when it is offered it is typically added by endorsement with its own sublimit and deductible, or written on a separate flood policy. If your site is in or near a flood zone, ask about flood before you bind, not after the first heavy rain.

When does builders risk coverage end?

Builders risk is temporary coverage. It typically ends at the earliest of the policy expiration date, the building being occupied or put to its intended use, or the project being completed and accepted, depending on the policy wording. The permanent property or homeowners policy needs to start before that happens, with no gap between them.

Starting a Build in Texas? Talk to Us Before the Materials Show Up.

Bring the contract, the lender's insurance requirements, and the schedule. We will tell you who needs to carry the policy, what the wind and hail deductible really comes to in dollars, and what is missing. If it is not a fit, we will tell you that too.

Call (801) 505-5500 or start with a builders risk application.